Purlins and Eaves Beams

Zed Purlins, C Sections and Eaves Beams are fixed to the rafters, sides and gables of the building to support the Roofing and Cladding Sheets in use. They will vary in size and thickness according to the size of the building.

 

Zed Purlins and C Sections are used extensively in the shed building industry to make the main frame of the building, and the span (width) of the building together with wind loading will determine the size of Zed or C Section used.

 

The Eaves Beam is a major structural component of the building, the Eaves Beam supports the Roof Sheets, Wall Sheets and Gutter of the building and bolts directly to the Cleat Section.

 

 

We stock Galvanised Zed Purlins and C Sections with all accessories in the following lengths and depths:


Zed Purlins 140mm and 177mm Depth x 1.6mm Gauge

 

15 ft (4.575 metres) Zed Purlins - Standard Punched Holes

20 ft (6.095 metres) Zed Purlins - Standard Punched Holes

 

C Sections 140mm & 177mm Depth x 1.6mm Gauge

C Sections 200mm Depth x 1.8mm Gauge

 

15 ft (4.575 metres) C Sections - Plain No Punched Holes

20 ft (6.095 metres) C Sections - Plain No Punched Holes

 

 

We also stock Weld / Bolt On Cleats for attaching purlins to your steel portal frame, along with Anti-Sag Bars to help during wind uplift conditions. In addition, we supply a range of Fixing Screws to attach your Roofing & Cladding Sheets to the purlins.

 

Our Partners

Tata Marcle Drip Stop Hunter Kingspan Filon